Air Hog Smash Bots Front Panel Replacement

Participe da comunidade de reparos - Criar conta

Introdução

The purpose of this guide is to provide instructions on replacing the front panel and gaining internal access to the controller of the Air Hog Smash Bots.

O que você precisa

1. Passo 1 Front Panel
  Take out your controller and access to the back of the controller.
  Editar
  
  Pergunte ao FixBot
  
  Comentar
  
  1024
2. Passo 2
  Remove the screw on the battery lid. Using the Hex 4 socket and PH #0 bit, remove the 8 mm screw.
  Editar
  
  Pergunte ao FixBot
  
  Comentar
  
  1024
4. Passo 3
  Remove the 2 AAA batteries.
  Editar
  
  Pergunte ao FixBot
  
  Comentar
  
  1024
5. Passo 4
  Using the Hex 4 socket and PH #0 bit, remove the four 8 mm screws on the panel.
  Editar
  
  Pergunte ao FixBot
  
  Comentar
  
  1024
6. Passo 5
  Use the plastic opening tool to disconnect the front and back parts of the panel.
  
  Some of the internal components may be displaced when opening the controller.
  Editar
  
  Pergunte ao FixBot
  
  Comentar
  
  1024