Conserte seus objetos Comunidade Loja

Informações de reparo e diagnóstico para a FixHub Power Series | Estação de solda portátil, a combinação da estação de energia portátil e do ferro de solda inteligente. Lançamento em outubro de 2024.

20 Perguntas Visualizar todos | Peças para 32 Loja

Opções

Temp control not showing on firmware 1.2.2

I just received my soldering station and noticed that what I can do in the console seem more limited than I expected. Currently I can only see the status of the battery, what's connected to the USB ports, see serial number, reset battery status, and update firmware. I've attached an image of what my interface looks like and how I think it should look based on some sleuthing online. If the console still a work in progress or should I be seeing more, such as temp control?

Block Image
Block Image
Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 1
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas
Pergunta mais útil

Opções

So. I think I see what's going on here.

Your options is the top window and expected is the bottom one? Right?

The top screen shot is the Fix Hub power station. The bottom screen shot is the Fix Hub itself (the soldering iron). Since the power station has a display on it where the temperature can be adjusted, the console is not needed to do this, unlike when you use the iron alone.

In order to see these settings, you need to connect the iron to the computer directly. (I can actually tell even from your screenshot that you don't have an iron connected either. It shows nothing in either USB port on the Power Station). Mine even showed that the firmware on my iron was too new for my Power station when I had it connected.

Block Image

Esta resposta foi útil?

Sim Não
Pontuação 3
Adicionar um comentário

Adicionar a sua resposta

Isaac R Slayton será eternamente grato(a).
Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 6

Ao todo: 77