Why does my OP-1 keep restarting

Hey everyone, I have so many issues with my OP-1 it's driving me a bit nutty.

My first issue is the audio is only outputting a signal from the right side. I've checked the sync settings and in the mixer everything is being sent down the middle. I get a tiny output from the left side but it's very quiet and distorted. I have tried multiple cables and the OP-1's output settings too.

My second issue is that my OP-1 will often just turn itself off, go to restart, then crash. Sometimes it will turn back on and other times it won't until I reinstall the firmware. It keeps happening and won't consistently stay on for more than 30 minutes. ⏎

I really want to use my OP-1 for my live show but I can't in this state. Any advice is deeply appreciated! I've replaced the connector board recently (twice!) and the problems still persists. Thanks ⏎