Rep: 5
2
1
I bought SSD drive "Toshiba THNS128GG4BMAA for apple macbook air Rev B&C" (Ebay)
I installed it into my MB543LL (late 2008) instead old Samsung HDD. But Apple disk utilites does not see this drive and i can not format or install OS
Is there a way to make this SSD visible by Apple disk utilite ?
Esta é uma boa pergunta?
Rep: 685,3 mil
3,4 mil
1,1 mil
2,6 mil
The drive is probably a 3GB and needs to be slowed down to 1.5 GB to be seen. See if the drive has jumper pins and try 1&2 or 3&4.
Esta resposta foi útil?
is there a jumper on this SSD ?
I don't know, look at it.
no jumpers on Toshiba THNS128GG4BMAA
Contact Toshiba to see if it can be slowed down or if it is compatable: http://www.toshiba.com/tai/support_consu...
Were you able to find a cable that will work with that drive?
Esta resposta foi útil?
Rep: 5
2
1
you can use the same original cable. Just flip hdd to connect (Toshiba THNS128GG4BMAA must be connected not like original hdd) - inverted
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 1
Duração total: 1,957
1 comentário
i find answer myself. This SSD must be connected by inverted hard drive cable
por Andre