I am having the same issue as others I have read and also the batteries work. So I was wondering if a cord that is a wall outlet transformer that is 12v dc could be spliced and ran to the battery terminals 1st positive and last negative, independent terminals? Would that not be the same as 8 d cell batteries?
Esta é uma boa pergunta?
Rep: 463,4 mil
11
374
1,5 mil
Hi @mandykelly
Doing this would mean having a cable permanently attached to the speaker which may be bothersome. It also needs to be tethered correctly so that flexibility where it leaves the speaker would be minimal ensuring that there's no strain on the cable connections in the speaker.
Other than that you may have to check what the current rating is on the adapter that you have now that you wish to bypass, to ensure that the replacement 12V supply can supply the same amount of current and not less.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 1
Últimos 30 dias: 9
Duração total: 9
1 comentário
This question was migrated from https://meta.ifixit.com/Answers.
por iRobot