Conserte seus objetos Comunidade Loja

Repair guides and support for smartphones manufactured by Doogee.

75 Perguntas Visualizar todos

Opções

I manaxed to break my s60 light's battery cable

Hello, I broke an old Doogee S60 Lite mobile after opening it. I broke the ribbon cable connecting the battery. I tried fixing it with my soldering iron, but that just made the cable look more broken.

Block Image

Block Image

Block Image

Block Image

Block Image

My first idea was to buy a new cable, but I couldn't find one online. I thought I might as well buy a new battery with a cable, but you can't ship lithium (and in the screenshot I included, the connector seems to be on the wrong side!). So, any ideas?

Block Image

Note: I don't actually need this old phone, but I am haunted by the idea of having a degree in electrical engineering only good to decorate the wall, as they say here.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 1
Adicionar um comentário

2 respostas

Filtrar por:
Mais úteis Mais recentes Mais antigas
Pergunta mais útil

Opções

Hi @micro_s

Search online for BAT17S605580 battery to find suppliers that may suit you better.

Esta resposta foi útil?

Sim Não
Pontuação 1

1 comentário:

Your link helped, unfortunately I'm not sure I can import Li batteries to where I live, however this is useful for anybody else.

por

Adicionar um comentário

Opções

@micro_s how good are your soldering skills. take a look at the cable,, right by the connector. You see that it even lists the contacts and where these go: (P+) (NTC) (P-) Now, use a couple of strands of copper wire, like from an old LVDS cable etc. Something thin. Solder those from the battery to the connector. So instead of trying to repair your flex cable, simply apply jumper wires. Of course, after soldering, ensure that those wires are insulated so as not to shorten out on either the chassis, or amongst itself.

Easiest fix would be to not fix it at all, but to replace the battery, as my esteemed colleague already mentioned :-)

Esta resposta foi útil?

Sim Não
Pontuação 0

1 comentário:

Do you mean replace the ribbon cable completely and solder the LVDS cable to its connector, or repair the ribbon cable using the LVDS cable?

update: now the connecter piece that attached the cable to the circuit board broke, I can't use this method any more without soldering it directly to the board!

por

Adicionar um comentário

Adicionar a sua resposta

micro_s será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 16

Duração total: 40