Rep: 1
1
Having trouble removing the main top panel of Maytag washer MVW7232HWO. I removed the 3 screws in the back of the washer and then tried to lift and pull the main panel forward without success. It will not budge. Please help
Esta é uma boa pergunta?
Rep: 463,4 mil
11
374
1,5 mil
Esta resposta foi útil?
I’m still having trouble sliding the top panel forward enough to lift it. I tried to pry it with a screwdriver and it moves somewhat, but not enough. I applied lubricant, and even hit the back with a rubber mallet without success. What do I do now?
Did you remove the screws that hold the cover onto the back of the control panel?
Yes, I removed the 3 screws
The first technician that I spoke with from ifixit told me there was a manufacturer recall for this condition (removing the top cover).
I meant all the other screws along the bottom edge of the back panel that hold the back panel onto the control panel.
In all of the videos I checked they have been removed as well even though the back panel is still on.
Best I can count is that there's 3 possible 4 plus the 3 that you removed.
Últimas 24 horas: 14
Últimos 7 dias: 74
Últimos 30 dias: 350
Duração total: 1,180
