Rep: 421
7
1
1
This morning I accidentally fried my R3 I don’t know how, it was hooked up to the 9V battery and it was running blink as a test suddenly the lights went out and the 47uf capacitors started getting hot. So it’s time for an upgrade I have the R4 on its way but is there any way to get the R3 temporarily working
Esta é uma boa pergunta?
Rep: 785,1 mil
1,1 mil
894
2,3 mil
@thomas35549 a blown fuse would not cause this, If anything I would suspect the voltage regulator U1 (AMS1117) next to your DC In Jack.
Here is the layout Uno 3 Component Layout and here is the schematic Uno 3 Schematic The datesheet for the voltage regulator is here AMS1117
Esta resposta foi útil?
Ok thank you
Últimas 24 horas: 3
Últimos 7 dias: 7
Últimos 30 dias: 19
Duração total: 61
2 comentários
It might be a blown capacitor, can you check?
por Ryan
@ryan0001 idk how also I don’t have a volt meter available I believe I blew a fuse and that is causing them to get hot
por Thomas