Ir para o conteúdo principal

Lançado em 3 de março de 2017, o Nintendo Switch é um computador de mão que pode ser jogado na TV ou em qualquer lugar.

707 Perguntas Visualizar todos

Why my switch has a black screen but sounds?

Hi guys. I need help my nintendo switch boots up normally and shows signal from the dock but the screen is on it is backlit but it doesn't show any image plus the digitizer works because if i click something it makes sound. can you help me? It started doing this when I tried to fix the front frame and when I put it back this happened. Thank you in advance for your reply.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
2 comentários

My switch is on but the screen is just black and no light is coming from it can you help

por

@jacobmunguia has any repairs been done to it or has it been opened

por

Adicionar um comentário

1 resposta

Pergunta mais útil

There are two connectors for the screen, one is for the digitizer and the other is for the LCD. It sounds like you got the digitizer plugged back in correctly, but I'm guessing the LCD flex cable isn't seated quite right. Here's the cable you should be checking.

Block Image

You'll need to open the Switch back up and check that connector. There are two little tabs on either side that should both be butted up against the connector itself; if they're uneven or not inserted all the way you could well have video image problems.

Take a look at that and let us know what you find.

Update (08/31/23)

There is a second LCD connector that could conceivably be causing problems if it isn't in all the way.

Block Image

If you hold a flashlight up to the screen, can you see any image? If so, that would indicate that the backlight is out for some reason. On smartphones it wasn't unusual to blow the backlight circuit either on the LCD or on the logic board if you plugged and unplugged it with the battery connected, but as far as I know that hasn't been a big issue with the Switch so far.

Esta resposta foi útil?

Pontuação 2

2 comentários:

Hi thanks for responding so quickly I've already checked that connector I've reattached and unplugged it at least four times but strangely it always doesn't go the contacts seem fine because even though I haven't used a microscope. Because it's my first time repairing, I don't have access to this tool. what else do you think it could be?

por

Still nothing of i hold a flashlight nothing dunno what's appening🤷

por

Adicionar um comentário

Adicionar a sua resposta

pierfrancotorsiello@gmail.com será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 27

Últimos 7 dias: 168

Últimos 30 dias: 1,025

Duração total: 6,083