Ir para o conteúdo principal

Repair guides and support for top and front loading Whirlpool brand washers.

427 Perguntas Visualizar todos

Need to bypass lid lock Whirlpool cabrio WTW8040DW4

Need to bypass lid lock, looks like pins 1,4,5, and7 should all connect am I correct?

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
1 comentário

I'd like to add this to to holmy previous answere, I had to hold the blue wire , pin 4, to pins 1,5, and 7 for 30 seconds to make the machine think it was unlocked, and then remove it to make the machine think it was locked. I'm not completely sure if that as actually necessary or not.


Adicionar um comentário

1 resposta

Pergunta mais útil

The lid lock assembly part number is W10810403 and the lid lock pins are 1, 4, 5, and 7.

Esta resposta foi útil?

Pontuação 2

1 comentário:

I tied 1,4,5,7 together and it worked, but only once, looks like I need to check the connects on the main controller board, j-6, and try again, I'll get back with you thanks, Greg Winchester


Adicionar um comentário

Adicionar a sua resposta

Gregory Winchester será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 7

Duração total: 171