Ir para o conteúdo principal
Participe da comunidade de reparos - Criar conta

Um carro esportivo fabricado pela Toyota de 1992 a 1995. Ele possui um motor de 1,5 litro, 4 cilindros em linha, com uma transmissão manual de 5 marchas ou automática de 4 marchas.

Can I replace rear 6 ohm speakers with 4 ohm?

I'm replacing the rear speakers in my car and the factory ones say 6 ohm. However its much easier to find 4 ohm. I'm looking at some cheap ones on amazon rated for 30rms, the original say 15w on the back so I assume that is the rms for the factory ones. Could this damage the radio (still going to be using the factory stereo) or should I be safe? I don't know anything about speakers.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
3 comentários

2E DX Carburetor and Engine Services

por

1986 2E DX Carburetor and Engine Services

por

@muhabasultan are you talking about a Toyota Corolla are are you speaking about some speakers? What is it that you are needing help with?

por

Adicionar um comentário

1 resposta

Solução escolhida

Hi @carsman248

Not a good idea.

There is a risk of hardware damage to the amplifier in the stereo system. Connecting speakers which have a lower impedance than what the amp is rated for, may cause damage to the amp.

At the very least the sound will be distorted.

Esta resposta foi útil?

Pontuação 1

2 comentários:

Then what should I do? Would it be better to use 8 ohm? Or do I have to find some 6 ohm?

por

@carsman248

Find some 6 Ohm speakers.

Using 8 Ohm won't be good either.

It mightn't damage the amp but the sound won't be good.

por

Adicionar um comentário

Adicionar a sua resposta

Maxwell será eternamente grato(a).
Visualizações:

Últimas 24 horas: 1

Últimos 7 dias: 10

Últimos 30 dias: 28

Ao todo: 1,057