Conserte seus objetos Comunidade Loja

2690 Perguntas Visualizar todos

Opções

My iPhone 6s started smoking after I reconnected the screen

Hello!

i was going to replace the homebutton, so i switched off the phone, repaired it. then i started connecting screen and when i plugged one cable in, it started smoking. i was scared so i unpluged it. and plug again but this time with disconnected baterry. screen stopped working. idk if its problem of the phone or the lcd, its any way to fix this? (Phone actally truns on but without display, can check with the dnd button)

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0
Adicionar um comentário

2 respostas

Filtrar por:
Mais úteis Mais recentes Mais antigas
Pergunta mais útil

Opções

you didnt disconnect the battery the first time so you have probably blown the backlight filter on the logic board, if you shine a light on the screen you will probably see the image but you won't have backlight until its repaired

Esta resposta foi útil?

Sim Não
Pontuação 3
Adicionar um comentário

Opções

As Daniel says, you've killed the back-light filters on the motherboard. I don't know if you followed a guide but the first thing you must do on any device is disconnect the battery. Even if you try a new screen the chances are it still won't work. You'll need to find somewhere that does micro soldering to have the filters replaced.

Esta resposta foi útil?

Sim Não
Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

NameProfile.exe será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 9

Duração total: 79