Rep: 49
2
My hp pavilion elite m9500y has no video I tried to boot it up you can hear the fans and everything but there is no video. I think it is the cpu or the gpu
Esta é uma boa pergunta?
Rep: 460,1 mil
11
373
1,5 mil
Disconnect power from the PC and hold the PC power button operated for a full 30 seconds then release .
reconnect power and try starting
If OK check the coin cell battery on the motherboard is OK i.e. >2.5V
if not replace it
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 14
Duração total: 165
5 comentários
Hi @superfixer334,
Have you tried another monitor, video cable etc?
Is the HDD activity light working?
Most likely it is the GPU card although if it failed they may have been a beep error code on POST.
por jayeff
I have tried a different monitor and cable and the hdd light is solid green and there is no beep on boot up
por Evan
@superfixer334
Can't find the manual so I don't know if there's supposed to be a single beep for a successful POST or not.
If not and there's no HP logo on startup it may not even be starting -motherboard?
If the HDD light flashes indicating it is booting into Windows then it's the GPU card. You could try starting in "safe mode" to check if it s a driver problem
por jayeff
The hdd light flashes one time I hold the power button down and my monitor does not get a Signal
por Evan
Wait sorry I got the power supply light mixed with hdd light I can’t find a hdd light
por Evan