My partner has been disinfecting my surface book 2 during covid and started to show signs of small amount of corrosion in the screens port that connects the base/keyboard that also has to GPU in it as the nvidia GPU showing up and continuous connect/disconnect screen tone.
How can i repair or clean the port?
Esta é uma boa pergunta?
Rep: 784,1 mil
1,1 mil
894
2,3 mil
Chris Cameron that is usually caused by corrosive materials destroying the nickel and thus losing conductivity. You could try and use some isopropyl alcohol and cotton swab to clean it. Then you will need something slight abrasive to remove the pitting of it. Try a thin stiff brush or a hard (smoking)pipe brush. Something like this always comes in handy.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 5
Últimos 30 dias: 9
Duração total: 70
