Rep: 25
4
I have a 1st gen classic and when it is plugged in it gives me the file screen. However, when I try putting it in disk mode or debug mode it will freeze up on the apple logo and stay that way untill it either dies or I do a hard reset at which point it will go straight back to the file screen.
Esta é uma boa pergunta?
Rep: 783,2 mil
1,1 mil
893
2,3 mil
@zaccpecc could be a hard drive issue. I suggest you go into diagnostics mode and run the checks. Let us know what you find out. For now, my prime suspect is the HDD or the firmware
Esta resposta foi útil?
I've tried that and it just freezes at the apple logo and goes no further, I've tried a known working hard drive in it and had the same results. I've Eben tried getting into disk and debug mode with the hard drive taken out and had the same results as with it In.
Have you tried a complete reset on it?
What do you mean by a full reset?
Like a restore through iTunes etc.
How am i supposed to do that if it won't go into disk mode?
Últimas 24 horas: 1
Últimos 7 dias: 5
Últimos 30 dias: 7
Duração total: 113
