Ir para o conteúdo principal

Model A1311 / Mid 2011 / 2.5 & 2.7 GHz Core i5 or 2.8 GHz Core i7 Processor

432 Perguntas Visualizar todos

2011 21.5" iMac No Backlight

Hey guys!

So I have a 2011 21.5” imac I've been working on, and I cannot get the backlight working at all. I've been through 3 different LED driver boards, and even tested 3 different powersuppies. If I aim a light on the display at the right angle, I can see the apple folder flashing. Any other ideas on what the issue could be? Bad LCD?

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

I would focus on the cables and the connectors. How about taking some good clear tight shots of the cable ends and the connectors on the logic board side and the display side so we can see what they look like Adicionar imagens a uma pergunta já existente

Refer to this guide iMac Intel 21.5" EMC 2428 Display Replacement Steps 5, 6, 7 &8

Update (01/30/2021)

@Corbin Titus - Still not sure, but lets assume the cables and connections are OK. Then we need to assume the issue is within the logic board backlight power circuit.

Block Image

Block Image

Using a DVM and a boardview drawing test the three MOSFET’s I’ve shown you here. IF this is beyond your skill set you’ll need to find someone locally to help you.

Imagem de iMac Intel 21.5" EMC 2428 Display

Guia

iMac Intel 21.5" EMC 2428 Display Replacement

Nível de dificuldade:

Moderada

30 minutes - 1 hour

Imagem de iFixit

Guia

Adicionar imagens a uma pergunta já existente

Nível de dificuldade:

Muito fácil

2 - 5 minutes

Esta resposta foi útil?

Pontuação 0

12 comentários:

Added images

por

@Corbin Titus - Can you redo the display cable connection on the logic board your image is too blurred.

por

Added anither one

por

Hey, I saw what you added to your post, and I had a few more questions, the logic board I'm using is actually a replacement one that was supposedly tested and working, is there anything else it could possibly be? Is there a way to test the backlights on the display manually?

I can also test the MOSFETs

Edit: also, the fans run at 100%, which leads me to believe that the motherboard isn't able to detect / pickup the temperature sensor on the LCD maybe? (I have everything else plugged in)

por

Also, the LCD temp sensor and the vsync cable are connected together, is it possible the cable / temp sensor is bad, causing the LCD not to light up and cause my fans to ramp up?

por

Exibir mais 7 comentários

Adicionar um comentário

Adicionar a sua resposta

Corbin Titus será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 6

Duração total: 207