Rep: 23
1
Hi,
I turned on the TV and the picture was black but the sound was ok, therefore I did the light test and I could see that the panel is ok.
I have tested the backlight on the power board and I got 75V on Led1 and 75V on Led2, both on stand by and tv on.
I can't find the datasheet of the power board(photo attached)
Is there any way of getting the data sheet?
Esta é uma boa pergunta?
Rep: 785,2 mil
1,1 mil
895
2,3 mil
@essh19 the voltages from your power board sound about right. Check the backlight strips since they have a tendency of failing. Backlight strips are the same as for a Vizio D50-D1. Part number for the strips should be YX-50024011-4E761-0-B-63M -53285
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 2
Últimos 30 dias: 12
Duração total: 184
