Rep: 13
1
how many shims are there on the motor armature at the bottom end near the control board?
I have removed the armature from the housing and I am not sure how many shims there were.
thanks
Bill24
Esta é uma boa pergunta?
Rep: 449,9 mil
11
367
1,4 mil
Hi @bill24 ,
According to the parts list in the service manual (see p.25-26) there is a small packing washer - part #184, one large shim washer - part #183 and a nylon armature washer - part #186.
Hopefully this is of some help.
Esta resposta foi útil?
If you look at the service manual quantities, there should be _two_ of the small packing washers (part #184). There may also be another between the other side of the bearing and the fan, if required, to take up any vertical play.
Últimas 24 horas: 2
Últimos 7 dias: 7
Últimos 30 dias: 8
Duração total: 120
