Conserte seus objetos Comunidade Loja

This Plasma 42" TV has 2 speakers (output of 200 watts) with SRS Trusurround XT. It has 100 programs or channels with features like PIP (1 tuner), auto-off, auto sound leveler and OSD. It has Dynamic contrast ratio of 10000:1 and 1500cd/m2 of brightness. It has VGA resolution of 852 x 480 pixels. This set comes with 2 Composite, 1 S-Video, 2 component video input, PC Input and 2 HDMI Inputs.

4 Perguntas Visualizar todos

Opções

Led blinked 4-5 times(yellow) before power . No image or sound.

Tried several test.

Checked Va and Vs is running as labelled. Therefore there should not be any fault with power supply board.

Checked connection and fuse.

Anyone can advise what does the these 4-5 times blink codes mean?

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas
Pergunta mais útil

Opções

Hi @kaito32,

Here’s a image of the Protect mode troubleshooting flowchart taken from the TV’s service manual.

There’s no information in the manual as to what the blink error codes mean so this may be as good a place to start as any.

Block Image

(click on image to enlarge for better viewing)

Hopefully a start.

Esta resposta foi útil?

Sim Não
Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

Ron será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 4

Últimos 30 dias: 33

Duração total: 443