Error message displayed on printer.

Question

Epson Stylus NX415

The Epson Stylus NX415 is a color inkjet printer. The printer uses T088/69/68 ink cartridges, which use a wetness sensor behind the visible primary chip.

4 Perguntas Visualizar todos

Robert Passanisi @rep2

Rep: 1

Postado: 11 de abr de 2020

Opções

Error message displayed on printer.

The following error message is displayed on the printer. “ a printer error has occured. Then off the prjnter, then press On button to turn on. See your documentation. “ When this is done the error message is still there, even after unplugging the power and the line to the

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

2 comentários:

Please tell us the full error message and code if it had one.

11 de abr de 2020 por Dan

It just says error turn off and then on. It didn’t do anything

18 de set de 2021 por Lois Pento

Adicionar um comentário

1 resposta

Please tell us the full error message and code if it had one. — Dan
It just says error turn off and then on. It didn’t do anything — Lois Pento

Winston @winston_d Rep: 1 1 · Answer 1 · 2021-09-20T17:06:19-07:00

Winston @winston_d

Rep: 1

1

Postado: 20 de set de 2021

Opções

Turn off the printer using the Power button.
Use a pin to press and hold the Reset button at the back of the printer.
Turn on the printer but keep the Reset button pressed for at least 5 seconds.
Release the Reset button after a warning page is printed. After a few seconds, another page with the default IP address of the printer will be printed.
Use this IP address to reconfigure the printer to the computer system.

Esta resposta foi útil?

Sim Não

Pontuação 0

Adicionar um comentário

Epson Stylus NX415

Error message displayed on printer.

1 resposta

Adicionar a sua resposta