Ir para o conteúdo principal

Model A1199 / 2, 4, or 8 GB capacity

85 Perguntas Visualizar todos

Two small SMD passives knocked off the board when fixing water damage.

Hi all, I have a question about two small components on the logic board of an iPod 2nd Nano 2nd gen. There was some water damage inside it when I opened it, and I replaced caps on the other side that were damaged. However when I was working on the section right next to the battery solder joints, two tiny passive components got knocked off the board. I tried to find a schematic online for the board number 820-1995-A that’s listed on it, but I got nothing. Does anyone know what the values of these components are supposed to be, or have the schematic?

Block Image

Thanks,

Alec

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Pergunta mais útil

@alecm schematics for any of the iPods are not available. The only way to determine the value etc. for those components is by measuring them on another board.

Esta resposta foi útil?

Pontuação 2

1 comentário:

I was afraid of that. If anyone has a board that they're willing to measure those component's values on, I would be very grateful :)

por

Adicionar um comentário

Adicionar a sua resposta

Alec M será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 50