Ir para o conteúdo principal

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1158 Perguntas Visualizar todos

network problem after changing the back cover

my iphone 3g had a perfectly working network but the unfortunate part was the back cover looked horrible.... so i had a anada iphone 3g which i cracked and had a mb prob so i swaped the back cover for it everything work fine BUT THE FACT THE NETWORK KEPT DROPPING stating 'NO SERVICE ' but the before it was on FULL 4 BARS but now deas hardly 1 or 2 any solution at first i thot its the GPS Antenna but i got anada one and swapped it but no luck

any solution guys :)

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
2 comentários

came up with an ugly solution got a silcon casing and put copper wire on it and added the iphone on top of it and success 4 bars :)

por

cancel tht lol the main prob is wen i hold it in my hand netwrok drops but if put out of my hand it remains

por

Adicionar um comentário

1 resposta

Solução escolhida

Your network antenna may have been bent, disconnected, or otherwise deformed. Try opening the phone and checking the antenna, making sure it's seated properly and connected in the right places.

Esta resposta foi útil?

Pontuação 1

4 comentários:

im not sure where the antenna goes a foto would b great

por

i hav Two dock connectors but still no luck

por

Check this forum post that might help you:

http://forum.shaarpmind.com/showthread.p...

por

note : only get one or two bars in the house but my bb bold 9000 does full 5 bars

por

Adicionar um comentário

Adicionar a sua resposta

shirneet será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 715