Here is a video of the problem. I have replaced every board to no avail. There is no visible screen damage. Pressing on the bottom ribbon cables does nothing. The tcon board makes a faint screeching noise when the lines are present on the screen. Thanks
Esta é uma boa pergunta?
Rep: 782,4 mil
1,1 mil
893
2,3 mil
@cometcaliente since you already replaced every board and the noise on the t-con board could point to a bad gate on the LCD driver board. That is the board where the T-con board connects to and has the ribbon cables that terminate inside the LCD screen on it. It is part of the panel and can not easily (if at all) be replaced by DIY’er. Post some pictures of your board(s) and wiring as well. Let us know which boards you already replaced. Adicionar imagens a uma pergunta já existente on the
Esta resposta foi útil?
https://www.badcaps.net/forum/showthread...
Thanks Turkey, this is a link with pics
@cometcaliente yep. You got your answer. Either the Gate drivers on your LCD driver board or the side tab bonding. Nothing to add on that.
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 111
