SOLUCIONADA: Repairing the ribbon cables - iPhone 6

Repairing the ribbon cables

So my iPhone has had issues with the screen coming out of the phone itself, but that’s not the problem here. I was walking down some stairs and the phone slipped out of my hand, the screen coming entirely out, ripping 3 of the 4 cables holding the two parts together (see photo)

The four cables are the LCD, the Digitizer, and 2 other ones I’m unaware of. As you can probably tell, I’m not all that experienced in phone repairs.

I looked into buying a screen replacement, but those only come with 2 of the 4 needed cables. I’ve searched and searched and come here as a final plea for help.

Thanks, Jude.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

Postado: 11 de jun de 2019

Opções

4 cables are:-

Digitizer - top horizontal flex

LCD - second horizontal flex

Front camera/earpiece - third horizontal flex

Long home button flex - vertical flex by the power

I cant tell from ur pics which one u still have intact lol but if u take the screen apart then u should be able to tell by seeing what still plugs in…

Esta resposta foi útil?

Sim Não

Pontuação 1

7 comentários:

Sorry, the pictures aren't the best quality because they were taken from my laptop camera. Only 1 cable is in tact, so I figured I may as well replace them all.

11 de jun de 2019 por Jude House

Just check the one that's intact where it plugs in

11 de jun de 2019 por c9679

Or just buy a screen with all the parts and just transfer ur original home button and keep the remaining flex as a spare :)

11 de jun de 2019 por c9679

Do you know where I can get a screen with all the parts?

11 de jun de 2019 por Jude House

This i think has all the parts apart from the home button flex which u have to transfer over in order to keep touchid working

iPhone 6 Screen

11 de jun de 2019 por c9679

Exibir mais 2 comentários

Adicionar um comentário