Rep: 11
1
iPad mini 4 missing component help ?:)
I have missing component and guessing beige damage LCD fuse ? (but I’m not sure) that I would Please need to indentify ?
Would anybody know what components are those -please ?
Esta é uma boa pergunta?
Rep: 102,6 mil
10
54
291
I’ve never worked on an iPad mini 4 but those look like data line filters..problem is it won’t be easy to find a replacement besides a donor board to be on the safe side. Not sure at all if such components have the same specs as previous iPad/iPhones but I’d see no harm in trying if you have spares around. Maybe @benjamen50 or @refectio can be of better help than me.
Esta resposta foi útil?
Indeed, those are Common Mode Filters (Chokes). While there is no schematic for the mini 4, I suspect it is identical to what you see on the Air 2. Ideally, you will want to source them from a suitable donor board as some iterations of the iPhone/iPad uses different values. I wouldn't want to mismatch a choke from one version to the next, although it will probably still work.
Thank you friends for your kind help !
Going thru zxw software on previous models ,looks like iPad mini 2 has the similar set up (each filter is different number number ,so I will have to compare closer with mine mini 4)
I found set of filters and ordered and will attempt to replace it .
I think mine faulty shot filter is L2232 but still need to find tiny Resistor .
I ordered this after reading yours suggestions :
C$ 19.84 | 10pcs/lot for ipad mini LCD image LCD Data Filter Square Cap free shipping
https://s.click.aliexpress.com/e/ck99b9o...
When it arrives will install and let you know
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 3
Duração total: 66
