Ir para o conteúdo principal

Third generation Surface Pro tablet, released June 20, 2014.

123 Perguntas Visualizar todos

Testing a Surface Pro 3 battery that has been removed.

How do I use a volt meter to check the battery ? It is disconnected from the motherboard but there are no obvious pos and neg points. The cable appears to split internally in to 2 halfs.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

Hi John,

I am hypothesizing that the two halves are the main positive and negative terminals. Which one's positive, I'm not sure but it will just show up as negative voltage on your meter if swapped. I'm guessing the small traces near one split is either for sensing or individual cell charging.

BE CAREFUL not to short the battery with your leads!

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

John Macauley será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 13

Duração total: 154