Why is my power board burning?

Question

Vizio E420-A0

Vizio 42" LED TV released in September 2012.

45 Perguntas Visualizar todos

Carey @tardisgrooves

Rep: 25

2

Postado: 26 de nov de 2018

Opções

Why is my power board burning?

I’ve had my Vizio model M471i-a2 for about 4 years, and about a week ago it started emitting a strong burning smell, and then the top of the screen started having Black flickerings. Took off the back and saw a substantial burn mark on the power board.

Ordered a new board and put the new one in Saturday. Now (Monday night) the same thing is happening all over again to the brand new board!

Here’s a picture of the other side

Thank you turkey! Here’s a pic of the whole side of that board in case that’s helpful:

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 2

5 comentários

Did you try connecting power through a different outlet?

26 de nov de 2018 por TechTalks

Yes I did try another outlet

27 de nov de 2018 por Carey

I have the same problem, did anyone find a solution for this?

4 de jul de 2019 por Dude Linger

Hey dude, it did end up being my LED backlights. I wish I would have known that before purchasing new boards, as it will just burn through any new board you install.

5 de jul de 2019 por Carey

I have this same issue on the same model tv. Same burn marks on same board. Do I need to replace the backlights and the board or just the backlights?

7 de abr de 2021 por James Griffin

Adicionar um comentário

3 respostas

I have the same problem, did anyone find a solution for this? — Dude Linger
Hey dude, it did end up being my LED backlights. I wish I would have known that before purchasing new boards, as it will just burn through any new board you install. — Carey
I have this same issue on the same model tv. Same burn marks on same board. Do I need to replace the backlights and the board or just the backlights? — James Griffin

oldturkey03 @oldturkey03 Rep: 782,1 mil 1,1 mil 893 2,3 mil · Answer 1 · 2018-11-26T20:40:46-07:00

Pergunta mais útil

oldturkey03 @oldturkey03

Rep: 782,1 mil

1,1 mil

893

2,3 mil

Postado: 26 de nov de 2018

Opções

@tardisgrooves

that is the cold side of the board and we really would need the underside of it as well. We would need to figure out what circuit those jumpers belong to. From their location I would think that this might be an issue related to the LED backlights. You can always try another board but do not connect the backlight connector and see if it does the same thing. without a schematic it could be difficult to check it any other way.

Esta resposta foi útil?

Sim Não

Pontuação 3

3 comentários:

New pic below

27 de nov de 2018 por Carey

@tardisgrooves those look like MOSFETS Most likely for the LED boost circuit. I will try and see if I can find a schematic to verify this.

27 de nov de 2018 por oldturkey03

Thank you turkey! Bigger pic below

28 de nov de 2018 por Carey

Adicionar um comentário