LCD burnout sign after kept for a few months MBP early 2011

Question

MacBook Pro 15" Unibody Early 2011

Model A1286. Released February 2011 / 2.0, 2.2, or 2.3 GHz Quad-core Intel Core i7 Processor

586 Perguntas Visualizar todos

ngwenyuann @ngwenyuann

Rep: 11

1

Postado: 10 de out de 2018

Opções

LCD burnout sign after kept for a few months MBP early 2011

I had a MBP 15” early2011 with a failed GPU just this year and I kept the MBP in the drawer for 2mth,

recently I read on ifix it about there a step to disable the gpu and force to run on the intel building display and once I try to power up the MBP and notice this happen the display turned into such smear pattern and it’s inside the LCD not outside.

Anyone happen to have such issue before? And any solution on this? If the display can be save I might get a 2012 mid logic board and replace the defect 2011 early board.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

2 comentários

ngwenyuann post some pictures of what yuor screen shows with your question. Adicionar imagens a uma pergunta já existente

Also, did you try an external monitor to see what it displays?

10 de out de 2018 por oldturkey03

I notice the burnout mark on the mbp LCD only. My mbp had a failed gpu I got blue screen with stripe after the gray screen. But the burnout mark remain even during blue screen. This happen after I keep the mbp under my drawer for 2mth since the gpu failed.

10 de out de 2018 por ngwenyuann

Adicionar um comentário

1 resposta

Solução escolhida

oldturkey03 @oldturkey03

Rep: 782,5 mil

1,1 mil

893

2,3 mil

Postado: 10 de out de 2018

Opções

ngwenyuann those do not look like any kind of burn in. Those look like pressure marks. I would suggest to try and disassemble the actual panel and see if you can make out any damage to the diffuser sheets. If you can’t then I suggest a different display.MacBook Pro 15" Unibody Early 2011 Display Replacement

Esta resposta foi útil?

Sim Não

Pontuação 1

2 comentários:

Thanks for the information. It cost too much to replace the display and a logic board together. I just doesn’t understand why there are pressure mark on the display as I never place anything on the lid and I’ve check the lid doesn’t have any dent also. But anyway it’s pity to see it goes.

10 de out de 2018 por ngwenyuann

Hi have same issue pressure mark any remedy have found

26 de mar de 2024 por Sharmi

Adicionar um comentário

ngwenyuann post some pictures of what yuor screen shows with your question. Adicionar imagens a uma pergunta já existente

Also, did you try an external monitor to see what it displays? — oldturkey03
I notice the burnout mark on the mbp LCD only. My mbp had a failed gpu I got blue screen with stripe after the gray screen. But the burnout mark remain even during blue screen. This happen after I keep the mbp under my drawer for 2mth since the gpu failed. — ngwenyuann
Thanks for the information. It cost too much to replace the display and a logic board together. I just doesn’t understand why there are pressure mark on the display as I never place anything on the lid and I’ve check the lid doesn’t have any dent also. But anyway it’s pity to see it goes. — ngwenyuann

MacBook Pro 15" Unibody Early 2011

LCD burnout sign after kept for a few months MBP early 2011

1 resposta

Adicionar a sua resposta