Rep: 1
1
Fan was working fine. Turned it off. Next time I switched it on, it was trying to get up the power to spin the blade, but couldn't quite do it. The blade would move a fraction of an inch, then no more. I cleaned it, but thought a drop of oil might help lubricate it again. Doable? Where to apply the oil?
Esta é uma boa pergunta?
Rep: 1
1
Took it apart, cleaned dust and debris away. Put single drop of sewing machine oil in back of unit, moved motor shaft around to spread oil. Works better than when it was new!
Esta resposta foi útil?
Rep: 685,3 mil
3,4 mil
1,1 mil
2,6 mil
I can find nothing about oiling this motor. Here's the trouble shooting guide on it: Comfort Zone CZ6C Troubleshooting
Esta resposta foi útil?
Últimas 24 horas: 2
Últimos 7 dias: 6
Últimos 30 dias: 15
Duração total: 984
