Rep: 25
1
1
I have a ball animal 2 vacuum. The hose is getting sucked in and crimped at the base. I checked for blockages and did not find any. It's also not sucking up as much as it should. Any suggestions? Thanks in advance.
Esta é uma boa pergunta?
Rep: 463,4 mil
11
374
1,5 mil
Hi @kristieleigh19 ,
Have you checked that the filter is not clogged up?
Esta resposta foi útil?
I will remove and wash them and see if that works. Thanks!
Have you pulled the hose off and make sure you can see light all the way through? Typically if your hose is collapsing, there is a blockage issue somewhere.
Yes and nothing is there.
Does the sound of the motor and suction change when you disconnect the hose from down by the ball?
Yes, sound changes. Plz help
Últimas 24 horas: 2
Últimos 7 dias: 3
Últimos 30 dias: 26
Duração total: 1,825
