Digitizer and LCD flex cable replaced, S-Pen not working

NOT: Please make sure to review the model in question before proceeding with recommendation. Thank you so much guys (issue below)

Digitizer and LCD flex cable was replaced recently. This would be the second digitizer I have install on this device and the S-Pen worked fine. This time around I replaced the Digitizer and the LCD flex cable. Although everything works the s-pen does not work on the digitizer. The S-pen however, is detected every time I remove it from and into the slot. One thing I want to add is that I have the N8013 model, parts I have bought were listed for the N8000 but was told they are all the same. Again, used the same thirds party screen last time and had no issues.

Any help on this would be greatly appreciated

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário