Optical Drive Laser pot value
Hello. Can someone please add the poti values ? From the optical drives / lasers ?
Esta é uma boa pergunta?
Pontuação
0
414636
1 resposta
Pergunta mais útil
Rep: 783,7 mil
1,1 mil
894
2,3 mil
@thesupport you are not very specific about which values you are looking for. You usually would require an oscilloscope to adjust those post properly. You can of course use values that have been obtained from experience by others. IMHO this is the best site for that.
Esta resposta foi útil?
Pontuação
2
Agreed, but don't forget that the service manuals also provide information on the tuning of the pots.
