Rep: 4,3 mil
19
20
22
Hello iFixit! I need a bit of help here because I cleaned my Apple Watch Sport 2 With a alcohol prep pad, and some of the cloth is now stuck inside the digital crown, making it hard to turn on occasion. My nearest Apple Store is 2 hours away and I have all the tools to DIY it. What should I do?
Esta é uma boa pergunta?
Rep: 101,2 mil
8
172
358
@reedcrosby,Reed, You may have to get yourself a cheap dollar store magnifier/glasses to aid in seeing if fibers are accessible to dislodge with a small pin/compressed air(should work). If not then you may have to partially disassemble watch to get at debri. Link below shows how to disassemble, if need be. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.
Esta resposta foi útil?
Thank you! I never thought of that...
@reedcrosby, Reed, Welcome, thanks for replying back and good luck with your Apple watch.
Thanks for the luck, I might need it!
Rep: 16,1 mil
39
92
13
Try getting some tweezers and just slowly getting rid of all the fibers, they should eventually come out.
Esta resposta foi útil?
I would, but the issue is I cannot see them but I can feel the resistance from them.
Últimas 24 horas: 1
Últimos 7 dias: 10
Últimos 30 dias: 33
Duração total: 2,905
1 comentário
I would also like if it could be done without opening it as I like my waterproofing seals!
por Reed Crosby