The Shark Rocket HV301 is the second installment of vacuums in the 300 series. It is a two-in-one vacuum that comes with several attachments, making it capable of cleaning on different surfaces. Its sleek and lightweight design make it easy to maneuver around any household.

12 Perguntas Ver todas

Brush Roll Not Turning On

The brush roll will not turn on at all anymore. There seems to be no power getting to it. If I take the stick part off and attach it directly to the canister, it works. Do I need to buy a new stick? Where can I get one?

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 2
Adicionar um comentário
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

4 Soluções

Solução escolhida

Hi,

It may be that the brush roll drive belt is broken.

Here is a link to the ifixit guide to repair / replace the brush roll. The belt is shown clearly in Step 8 of the guide.

If it is broken then here is a link to suppliers of the part.

Hopefully this is of some help.

Esta resposta foi útil?

Pontuação 3
Adicionar um comentário

you have a loose wire in the extension handle part.

uplug the vacuum.

open up the handle and repair the torn / broken wire.

be sure to cover with electrical tape.

Esta resposta foi útil?

Pontuação 1

Comentários:

Thanks for the answer except it is hard to know where on the handle it should be opened up. Pictures would be nice, but if not at least a good description of exactly where to open up. Thanks!

por

Adicionar um comentário

You probably won't need a replacement part. I would start by checking the connections on the female side of the wand. I believe you will find that one more of the connections will have foriegn matter covering the contact points causing the problem. Please make sure your vacuum is unplugged from the power source before you clean the connections. Your welcome!

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

The Underestimated seems to be right in my case, although, the female connection (on the motor part of mine, rather than the stick) that is the problem, is not cluttered with debris. Rather, it seems to be missing the connection piece altogether. The hole is just empty. Ugh…what to do now…

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Carrie Pandya será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 44

Últimos 7 dias: 268

Últimos 30 dias: 985

Todo: 8,258