Rep: 9
1
1
Hi!
When I replaced the iPhone 4 LCD + touch, I have strange colors, not normal, where can be problem?! I dont thinks so that is in LCD cause when I return my broken LCD + touch also same problem, the problem has appeared when I replace LCD + touch.
Have you ever had similar experience?
http://img826.imageshack.us/i/img00321p....
best regards, marko
Esta é uma boa pergunta?
Rep: 782,4 mil
1,1 mil
893
2,3 mil
Pongra try this. Go to settings and then general then accessibility and then turn off the white on black option. I seem to remember having read something about the screen being in negative mode....reversed colors. Not a guarantee, just a start. I know it is somewhere in the settings. Let us know.
Esta resposta foi útil?
and of course make sure that all cables and connectors are properly seated and secured.
Yes, thanks for that, I did it and everything is good now, thx again guys.
Dear oldturkey03,
Thank you so much!! That worked for me too!!
Bless you!
Thanks oldturkey03! Worked like a charm.
I have just replaced my old screen with a DIY kit and it seems to be in negative and when I put the actual iPhone in negative it goes kinda normal again but it also has lines going across the top of the screen, HELP!
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 10,031
