Pular para o conteúdo principal

The fourth iteration of the popular 7" Galaxy Tab line of Samsung tablets.

138 Perguntas Ver todas

Can I use a charging port for a 10 in on my 7.0 in instead?

My tablet won't charge so I went to order a new charging port to fix it my self. I ordered it but once ordered I noticed it was for a 10 in instead of 7 in. So will it still fit?

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

3 Soluções

Solução escolhida

Even if it does fit the circuit lines on the charging port flex is most likely different.

You need to be careful which model number charging flexes you use on other models.

For example with Samsung galaxy S4 charger ports i9505 ones can be also used on i9507 and i9506 since they use the same model port internally.

For i9500 ports though they can't use i9505 and vice versa.

For tablets it's a little more tricky you have to get a model that is very close like gt-p5100 compatible with gt-p5102.

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

@dillsjamie ,Jamie, Probably better not to chance it over a couple bucks, to go to all the work and the charge port not working or causing more damage. Just send back the wrong part and reorder correct port. Added a link below to show tear down to access charge port. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

Samsung Galaxy Tab 4 7.0 Motherboard Replacement

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

@dillsjamie no you cannot. The Samsung Galaxy Tab 4 10.1 (SM-T530) use a charging port flex whereas the Samsung Galaxy Tab 4 7.0 (SM-T230) uses a charging port that is soldered to the motherboard. This video should show you how to replace your charging port.

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

Jamie será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 77