after replacing the battery, all lights flasing and no o.p.
after replacing the battery after long non use all the lights are flashing and and no output
Esta é uma boa pergunta?
Pontuação
0
320683
1 resposta
Rep: 448
11
6
2
If the batteries have been replaced the UPS may need to charge them before it will respond correctly. Leave the UPS plugged in but off for 8 hours, then try again; before blaming a circuit board.
Esta resposta foi útil?
Pontuação
0
kvpselvam all LED's flashing at the same time indicates an internal fault. Time to take it apart and check the circuit boards and capacitors.
por oldturkey03