Rep: 11
1
i replaced my drivers side caliper and hose and i bled the brakes and now i lose break pressure when i start my car ?
i have pressure before i start my car then the petal goes to the floor and there is no fluid coming out of bleeder
Esta é uma boa pergunta?
Rep: 102,5 mil
18
191
304
Check for leaks in the lines . Make sure all fittings are snug and have no moisture on them .When you changed the hose and caliper did the master cylinder loose fluid ?
You may need to bled the master cylinder if it got air in it it must be bled separately .
Esta resposta foi útil?
i have pressure but when i start my car i lose pressure and very little fluid comes out of the bleeder
than you for your help , it's weird i have brakes now i let my car sit for two days and it seams the air worked it way out of the system , so thanks
Hi longm129,
If air can get out so can liquid so keep an eye on the brake fluid level in the master cylinder.
ok, i will keep an eye on it , thank you
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 146
