I did read somewhere that there is an option to install a secondary battery in the keyboard dock. How can I do that? Any suggestions will be helpful. Thanks and Regards,
Naveen Prakash Srivastava
Esta é uma boa pergunta?
Rep: 449,1 mil
11
366
1,4 mil
Hi,
I think that there is a bit of confusion when you read the specifications.
I think that it means that the only battery (a 3 cell 41W battery in the tablet), will last 6:35 hours with the dock connected and 6:48 hours when it is not.
Not that there is a 3 cell battery in the tablet and a 3 cell battery in the dock.
Here is a link to the specifications.
http://support.toshiba.com/support/stati...
Also for what it is worth, here is a link which says:
"I also found myself wondering why there's no secondary battery built into the docking keyboard, as seen on the HP 13t-h200 x2; with the extra battery, it lasted 7:15, and I can imagine the Click 2 Pro could easily break the 8-hour mark if it had some reserve power in the keyboard to draw on.
Esta resposta foi útil?
Hi Jayeff , there is another variant for Click 2 pro ( P30W-BST2N22 )
And this model has a secondary battery in its dock. so it has a 3 cell battery in the dock and another 3 cell battery in the tablet part
here is the link
http://support.toshiba.com/support/model...
For the data sheet here is the link
http://support.toshiba.com/support/stati...
Regards,
Naveen
Hi naveen,
Thanks for the feedback
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 530
