Rep: 85
2
2
Turn signal and brake lights do not work on my 88 Chevy pick up hazard lights do work it one time there was a fire in the Dashboard melted the wires . I need information on what color the wires are for their turn signals and brake lights and where they are located
Esta é uma boa pergunta?
Rep: 782,5 mil
1,1 mil
893
2,3 mil
Mark Eggleston, that is a tall order ;-). Check the diagram first
and then read through attached Silverado 1988-2005==>> CHEVROLET-SILVERADO-1988-2005.pdf<<== wiring diagram. Personally I'd replace the complete wiring harness. Anytime you've had fire damage you'll always run into more molten cables etc. It's a bit of a PITA to fix that by splicing and rewiring.
Esta resposta foi útil?
Thanks a bunch Mark Eggleston. I was looking for the parking light wire under the hood to attach the parking light flasher on an alarm. It's the brown wire on the driver's side run along the top of the innder fender.
Rep: 13
1
Últimas 24 horas: 20
Últimos 7 dias: 176
Últimos 30 dias: 661
Duração total: 32,052
1 comentário
How to wire in a light for a compass. Requires a 1 amp fuse for my 1988 Chevy 2500 pickup
por Alden Zrust