Rep: 37
3
I need help to repair the charging port
but the problem is the board damaged when the charging port brooked as the attached photo https://www.facebook.com/photo.php?fbid=...
the lead welding doesn't stick to the board
Esta é uma boa pergunta?
Rep: 784,8 mil
1,1 mil
894
2,3 mil
mohtraxx, looks like you are not using enough flux, and an iron that is to big. If not sure how to properly attach it, I'd suggest you send it somewhere to get it soldered before you lose the solder pads as well.
Esta resposta foi útil?
Thank you oldturkey03
The problem is whil I removed the old port the bins removed with copper pads on board
the outside pins came off with the pads? Post an image of your connector as well with your question
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 3
Duração total: 158
