Rep: 1
1
The tools listed here MacBook Pro 15" Unibody Mid 2012 Logic Board Replacement are not helpful. I'm looking for a torq-set screw size which come in size 6, 8 or 10. I do not know the correct size for the screws which hold the Airport Bluetooth Card Bracket. The screws can be seen in this photograph.
Esta é uma boa pergunta?
Rep: 259
4
1
The logic board replacement instructions seem to indicate that it uses T6:
MacBook Pro 15" Unibody Mid 2012 Logic Board Replacement
Edit:
The screws in your image are most definitely Philips. I can't place the location against anything similar in the guides, but I'm guessing #00 based on the AirPort/Bluetooth guide:
MacBook Pro 15" Unibody Mid 2012 AirPort/Bluetooth Board Replacement
Edit 2:
I found the item depicted in the picture. It appears to be one of the retaining clips screwed to the upper case. This one appears to be between the battery and the optical drive. You shouldn't need to remove them, they were not removed during the teardown.
Guia
Nível de dificuldade:
Moderada
Guia
Nível de dificuldade:
Moderada
—
30 minutes - 1 hour
Guia
Nível de dificuldade:
Difícil
—
30 minutes - 2 hours
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 3
Últimos 30 dias: 4
Duração total: 312
4 comentários
Which MBP 15"? Please give us the last four figures of your serial number.
por mayer
Serial No.: CO2JM3FMDV35
por Kyle Wegner
Apple MacBook Pro "Core i7" 2.6 15" Mid-2012 Specs
Identifiers: Mid-2012 15" - MD104LL/A - MacBookPro9,1 - A1286 - 2556*
por mayer
william hit the correct guide. Each guide lists the tools needed in the peramble.
por mayer