SOLUCIONADA: Some one using TI EV2300 to program/hack a Battery back - Tool

Some one using TI EV2300 to program/hack a Battery back

TI EV2300 is a tool to program BQ series battery gauge.

I'm considering to get my A1185 out of "Permanent Failure" using EV2300.

Some one ever tried that or have some info/suggestion?

Thanks!

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

Postado: 2 de jul de 2010

Opções

did you check the lipo cells first? are the fuses ok? - if a battery fails - it's most likely the problem of the cells and not the pcb inside the battery

so checking the voltage of every single cell and their fuses would be my first step - but that involves disassembling the battery (be careful and don't bent the cells)

Esta resposta foi útil?

Sim Não

Pontuação 0

1 comentário:

'cause i'll replace the cells and the g**d*** "self destructive" fuse. and i know what i'm doing.

just need some tool to reset BQ20Z80 status.

i don't know if this can be done by just programming SMBus...

2 de jul de 2010 por Terrance

Adicionar um comentário

Tool

Some one using TI EV2300 to program/hack a Battery back

1 resposta