Is it possible to re-attach a dislodged charging port on the main board. It seems to have come off the motherboard on a tablet. I can access the inside but don't know where to go after that.
Esta é uma boa pergunta?
Rep: 1,7 mil
14
8
6
You would have to realign all the connectors and then solder it back in place but yes it is possible
Esta resposta foi útil?
Is there a special solder gun for this? The one I have may be too large for detailed soldering.
The connectors are very small and very close to each other.
I don't know what kind of soldering gun you have but some have interchangeable tips. If your tip is fixed you'll need to find a fine tip gun so you dont further damage the motherboard
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 70
2 comentários
Titu, most of the time it can be resoldered. In your case, since you did not tell us which tablet etc. we can only guess.
por oldturkey03
It's a Chromo 7" Android tablet
por Titu