Conserte seus objetos Comunidade Loja

Quinta Geração do Iphone. A Reparação deste dispositivo é correta, requer ferramentas especificas e paciência. GSM/CDMA/16, 32 OR 64 GB/Black or White.

2193 Perguntas Visualizar todos

Opções

White screen with lines after touching the Silentbutton cable

Hi there,

I had to change my headphonejack. Everything went fine. I could use my headphones again. After a while the silent switch didn't lock right in place. I opened the back and replaced the cable (just touched it with a repair tool) after that the silent switch worked but the screen showed white with many moving lines.

I had this befor and the only solution was to replace the display.

Why is that? I didn't touch the display or the display cables itself?

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação -1
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas

Opções

I would try disconnecting the battery and then disconnecting and reconnecting the display and digitizer connections to the motherboard. Then reconnect the battery again and power on the phone. Also inspect the digitizer and display cables and check to see if they have any damage and are connected properly to the motherboard. Hope this helps.

Look at step 17 for LCD and digitizer connections: iPhone 4S Screen Replacement

Esta resposta foi útil?

Sim Não
Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

tarsonis será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 41