Ir para o conteúdo principal

Versão renovada do iPhone 3G com velocidades de processamento mais rápidas. O reparo deste dispositivo é semelhante ao do 3G e requer simples chaves de fenda e ferramentas de abertura. Modelo A1303 / 8 GB,16 GB ou 32 GB de capacidade / Parte traseira em plástico preto ou branco.

1500 Perguntas Visualizar todos
Pergunta encerrada

Why wont my iPhone charge, even after replacement?

My Iphone 3Gs wouldnt connect or charge to my charger but my sisters would so I knew it was my phone, I thought that my battery blew so I replaced it and everything turned on and worked but it still would not charge, I put it in restore mode and then put it on my ihome, it recongnized it and turned on but still no charge.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Pergunta mais útil

mrvalenzuela119, normally I would say to start with your dock connector. Check to make sure that the proper pins receive power. Check the pinout on here. If that looks okay, check the "fuses" on the logic board for continuity, it is possible that your charging fuses is shorted. After that it could be your PMIC or charging coil. All of those are of course board level repair and require some good skills, good tools and a lot of patience. Hope this helps, good luck.

Block Image

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 264