battery connector, solder pads are gone.
I need help.
3 of the pads from the battery connector are gone.
Could someone show me where I have to set the jumpers?
thx.
Esta é uma boa pergunta?
Pontuação
0
117169
1 resposta
Solução escolhida
Rep: 784,3 mil
1,1 mil
894
2,3 mil
Lars, see if the attached image will help.
Esta resposta foi útil?
Pontuação
1
thanks a lot :-)
You are welcome. Good luck.
So the second pin you can use a single strand copper wire to the first and second pins from the left and then use another one to the gold pad?
