The iMac is Apple's line of all-in-one desktop computers.

6404 Perguntas Ver todas

Removing suction cup marks from glass after replacement

After replacing the glass front on my imac and removing the heavy duty suction cups, I noticed a ring mark was left behind by each suction cup. Window cleaner did not remove the marks--is there a recommended way to safely remove these marks?

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

3 Soluções

Solução escolhida

Did you try with with ether or and hydro-alcoholic solution ? only a few otherwise you could make some damage on your screen....

If this answer was helpful please remember to mark it accepted.

Esta resposta foi útil?

Pontuação 2

Comentários:

Isopropyl alcohol did the trick--thanks for the suggestion!

por

You're welcome. Thanks for accepting my answer...

por

Adicionar um comentário

Here is another option, this will work when nothing else will ! http://www.ibreakityoufixit.com/shop/cle...

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

try the Ritec Ritepolish a mildly abrasive cream cleaner used for the romoval marks left by suction lifters on glass, mineral and other deposits.

http://www.wholesaleglasscompany.co.uk/a...

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

zoomngeorge será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 8

Últimos 7 dias: 44

Últimos 30 dias: 201

Todo: 6,727