Ir para o conteúdo principal
Conserte seus objetos
Direito de executar reparos
Membro desde 29/06/2014
Boots then Shut down
I have an iPad Air 2 which is starts to boot then turns off. After screen keeps flashing with Apple Logo. When I check...
iPhone 8 NO Modem firmware
Hi! I have an iPhone 8 (Intel version) which acting strange. Phone boots normally!!! Connecting to DC power it draw...
PMIC Replaced - Missing voltages
I have an iPad Air (1st gen) which I have replaced the PMIC. The reason for that is because the iPad charges only when it...
Apple Watch PCB repair
Hi! Is there any board view for Apple watch series 1 - 6 out there? It’s missing from ZXW .. A need it because I want to...
No backlight NO Image problem
Hello Guys! This is an advanced question. iPhone SE NO backlight and NO image. I have already replaced every components on...
NO Touch ID, NO pressure sensing - Home Button not working
Hi! iPhone 7 after a hard fall does not see home button anymore. I have a screen with good working home button so I know...
NO IMEI, NO Signal, NO Activation - PP_1V0_SMPS5 Low resistance
I have an iPhone 7 NO IMEI, NO Signal, NO Activation. I have REMOVED BBPMU_RF chip and measured values in diode mode. I...
Resposta para "Boots then Shut down"
This is the thing… If I plug it into my mac it does not recognise it. I try to put it into DFU mode But nothing happen. Im an iOS Technician but I never seen something like this before
Resposta para "Stuck in boot loop after battery replace, nothing helps"
Is it charging correctly?? What is the reading on ammeter?
Resposta para "iPhone SE screen glitch & restart"
I had a similar problem. After investigating under Microscope I found out that one of the capacitors on the PCB board are loose. I have re soldered and problem fixed! :)
Reputação ao longo do tempo
Discriminação da reputação
Voto à favor da postagem