Digit

I had 6 ipad mini digitizer replacements with 6 success. I purchased the glass and digitizers wihout ic and home button...

I have seen this error many times on iphones with broken baseband chip after water damage or impact damages. Itunes trying to read device's baseband chip (IMEI number or something like that) to activate the phone. I guess same thing happening to your ipad CDMA. Baseband chip looks like not functioning. Reasons 1- If its water damaged try to clean mainboard shortcuts and resolder corroded components. 2- if it has impact damaged, using hot air on the baseband chip may bring the baseband function back. I dont know What temperature and howmany minutes. But you can google for it. Good luck ...

Looks like new battery is not working or not connected to mainboard. Howto test : Plugin to charger. Unplug it when you see the apple logo. If it goes black after unplug it means new battery is not good or not well connected to mainboard. The good battery should still show apple logo after unplug the charger.

I dont know what is speaker enclosure but there are 3 reasons for bottom speaker problems. 1- Replace the buzzer ( it is black plastic part with two screws. It also has GSM antenna ribbon on it) 2- replace the charging port assembly. It has charging port, microphone and speaker connectors. 3- replace the headphone jack flex cable ( yes ... Shorcut in headphone jack supresses speaker sound ) Before that you can also clean connector between charging port and speaker. Good luck ...

It looks like your phone is on. But LCD is not turning on. Bong sound means it is on and charging. Maybe 1 : everything is ok. Just reboot. How : remove the battery connector and LCD connector and reconnect both. Plug in to charger to see apple logo. Maybe 2 : LCD cable damaged while power button fix. You need a new LCD. Maybe 3 : some components on mainboard just next to LCD connector are damaged. It needs to be soldered under microscope. Good luck ...

Iphone 3gs with 6.15.00 baseband requires a custom firmware to restore. If you restore it through apple original firmware 6.15.00 baseband gets broken. Itunes will not recognize and will not charge it thats normal. What you can do. To make sure it has 6.15.00 baseband download redsnow. Try to charge it through a strong wall charger (ipad charger is the best). Do not connect to itunes. Connect to redsnow to see if 6.15.00 is the problem. If not let me know. It may be a different issue.. Good luck ...

It is not necessary if you put other 4 properly. Not going to create a functional issue. Right one just next to vibration motor ... That screw is on top of another screw. Maybe misplaced.

I would refresh soldering. It breaks easily. If not the soldering you need a new flex cable. Good luck ...

You need heatgun and some cards to separate. You can watch this guy. http://youtube.com/watch?v=1dhY51GqD2M Good luck ...

Its not the metal button problem. Problem is on the cable. There is a small black plastic dot on the yellow cap of connector. Its broken. You can replace the whole cable. Or very small square piece of paper can be glued on top of yellow cap (center of circle). Good luck ...

Try this first. Try to connect to wifi just next to the router. In my experience ipod touch 4th generation wifi works without antenna at least 5 feet around the router. Antenna is necessary after 5 feet distance. That way you can see if it has antenna problem or motherboard problem. Good luck ...